Removal of the main shaft motor and coupling

Removal of the main shaft motor and coupling:

  1. Removal of the main shaft motor together with coupling Loosen the two set screws (5) on the main shaft side of the coupling (2). Then, remove the four motor set screws (4).
  1. To remove the coupling (2) from the main shaft motor (3), loosen the two set screws (6) on the main shaft side. (Caution) Turn the main shaft in the direction of forward rotation

. (Caution) Turn the main shaft (1) in the direction of forward rotation (A) the screw (hole) that can be seen first is the No. 1 screw. Loosen the screws, starting with the No. 2 screw. Tightening should be done, starting with the No. 1 screw.

Comments

dfgdfsgdfgfdg

You may also like...