Category: Programming

Tutorial 1 : JUKI Programming software PM-1

Welcome to JUKI Programming software PM-1  tutorial, To run the software click on “Start” and go to program then find out :Juki PM-1 3.20″ & click on that. A page will display on the screen you...

How to install juki PM-1 v3.20

Juki PM-1 v3.20 Tutorial: It is a Programming Software for Computer-controlled Sewing Machines. This software is to input and edit sewing data of JUKI’s latest sewing machines. Its versatile input functions allow to input sewing...

JUKI Programming software PM-1 Tutorial 6

File Transmission in ROM writer: In the case where the AMS-205/-206 or LK-1900 Series model of sewing machine is used and a ROM writer other than the PKW-1100 (Pecker-11) is used, sewing data can...

JUKI Programming software PM-1 Tutorial 5

Mark of Control commands: Mark of mechanical control commands is next. Editing & configuration of sewing: A configuration that has already been input can be changed by adding, moving or deleting configuration points.  A...

JUKI Programming software PM-1 Tutorial 4

Input Function: Input procedure begins with the click-on the button corresponding to the sub tool bar that contains the desired type of input.  Subsequent procedure slightly differ with configuration, sewing and mechanical control command. ...

JUKI Programming software PM-1 Tutorial 3

Data: Data are classified into several groups such as configuration data on lines, arcs and circles, sewing data, and jump data that joins sewing data with mechanical control command such as thread trimming or...

JUKI Programming software PM-1 Tutorial 2

Menu bar: The menu bar contains the following functions. Tool Bar: The tool bar consists of selector buttons for the functions that are same with those given in the menu bar, selector buttons for...