How to Adjust Brother Sewing Machine

Adjusting arm thread guide R

ismtechbd.com

The standard position of arm thread guide R (1) is the position where the screw (2) is in the center of the adjustable range for arm thread guide R (1).

* To adjust the position, loosen the screw (2) and then move arm thread guide R (1).

・ when sewing thick material, move arm thread guide R (1) to the left. (The thread take-up amount will become greater.)

・ when sewing thin material, move arm thread guide R (1) to the right. (The thread take-up amount will become less.)

Adjusting the presser foot height

ismtechbd.com

 

The standard height of the presser foot (1) is 6 mm when the presser foot (1) is raised by means of the lifting lever (2).

 

  1. Loosen the nut (3) of the adjustment screw (4), and then turn the adjustment screw (4) so that there is no pressure applied to the presser foot.
  2. Raise the lifting lever (2). The presser foot (1) will also rise.
  3. Remove the oil cap (5).
  4. Loosen the bolt (6) and then move the presser bar (7) up or down until the presser foot (1) is at the standard height of 6 mm.
  5. Tighten the bolt (6).
  6. Replace the oil cap (5).
  7. Adjust the presser foot pressure using the adjustment screw (4), and then tighten the nut (3).

 

Comments

dfgdfsgdfgfdg

You may also like...